Cadillac 2014 ELR Owner's Manual page 40

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-6081525) -
2014 - crc - 10/2/13
2-6 Keys, Doors, and Windows
1. Remove the key from the
transmitter and insert the vehicle
key into the key cylinder above
the license plate.
2. Open the trunk.
3. Turn the key counterclockwise
five times within 10 seconds.
The DIC message displays
REMOTE LEARN PENDING
PLEASE WAIT.
4. Return the key base back into
the RKE transmitter.
5. Wait for 10 minutes until the DIC
displays PRESS ENGINE
START BUTTON LEARN, then
press the POWER button.
The DIC reads REMOTE
LEARN PENDING,
PLEASE WAIT.
6. Repeat Step 5 two additional
times. After the third time all
previously known transmitters
will no longer work with the
vehicle. Remaining transmitters
can be relearned during the next
steps. The DIC display should
now show READY FOR
REMOTE #1.
Black plate (6,1)
7. First remove the rubber liner to
access the pocket. Place the
new transmitter on the indent in
the center console storage bin.
8. Press the POWER button.
When the transmitter is learned,
the DIC display will show that it
is ready to program the new
transmitter.
9. Remove the transmitter from the
transmitter pocket and press
or on the transmitter.
10. To program additional
transmitters, repeat Steps 7 9.
Q