Tire Designations; Tire Terminology And Definitions - Cadillac 2014 ELR Owner's Manual

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-6081525) -
2014 - crc - 10/2/13
10-46 Vehicle Care
(7) Maximum Cold Inflation
Load Limit Maximum load
:
that can be carried and the
maximum pressure needed to
support that load.

Tire Designations

Tire Size
The following is an example of a
typical passenger vehicle
tire size.
(1) Passenger (P-Metric)
Tire The United States
:
version of a metric tire sizing
system. The letter P as the first
character in the tire size means
a passenger vehicle tire
engineered to standards set by
the U.S. Tire and Rim
Association.
(2) Tire Width The three-digit
:
number indicates the tire section
width in millimeters from
sidewall to sidewall.
(3) Aspect Ratio A two-digit
:
number that indicates the tire
height-to-width measurements.
For example, if the tire size
aspect ratio is 60, as shown in
item 3 of the illustration, it would
mean that the tire's sidewall is
60 percent as high as it is wide.
(4) Construction Code
:
letter code is used to indicate
the type of ply construction in
the tire. The letter R means
radial ply construction; the
letter D means diagonal or bias
ply construction; and the letter B
means belted-bias ply
construction.
Black plate (46,1)
(5) Rim Diameter
the wheel in inches.
(6) Service Description
These characters represent the
load index and speed rating of
the tire. The load index
represents the load carrying
capacity a tire is certified to
carry. The speed rating is the
maximum speed a tire is
certified to carry a load.
Tire Terminology and
Definitions
Air Pressure
:
air inside the tire pressing
A
outward on each square inch of
the tire. Air pressure is
expressed in kPa (kilopascal)
or psi (pounds per square inch).
Diameter of
:
:
The amount of