Replacement Bulbs; High Voltage Devices And Wiring - Cadillac 2014 ELR Owner's Manual

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-6081525) -
2014 - crc - 10/2/13
10-28 Vehicle Care
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the lamp assembly (3)
toward the right.
2. Pull the lamp assembly down to
remove.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release tab
locks into place.

Replacement Bulbs

Exterior Lamp Bulb
Number
License W5W LL
Plate Lamp
For replacement bulbs not listed
here, contact your dealer.
Black plate (28,1)
Electrical System
High Voltage Devices and
Wiring
Warning
Exposure to high voltage can
cause shock, burns, and even
death. The high voltage
components in the vehicle can
only be serviced by technicians
with special training.
High voltage components are
identified by labels. Do not
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering. Do not probe,
tamper with, cut, or modify high
voltage cable or wiring.