Specifications; Setting Plate; Wall Plate - Epson EB-1430Wi Installation Manual

Installation Guide

Specifications

Setting plate

Item
Setting plate weight
Maximum load capacity
Forward/backward slide ad‐
justment range
Vertical slide adjustment range ±38 mm
Horizontal roll adjustment
range
Horizontal rotation adjustment
range
Vertical tilt adjustment range
Horizontal slide adjustment
range

Wall plate

The following figure shows three wall plates connected to form one plate (separate when shipped).
* Offset value for the position of the center of the projected image and the center of the wall plate
Specification
Approx. 8.1 kg Setting plate (3.0 kg), 3-axis adjustment unit
(1.2 kg), slide plate (0.8 kg), wall plate (2.7 kg),
wall plate cover and end cap (0.4 kg)
7 kg
0 to 360 mm Arm slide adjustment range: 0 to 273 mm
Adjustment for 3-axis adjustment unit instal‐
lation position: 87 mm
±3° Fine adjustments possible with adjustment
dial
±8° Fine adjustments possible with adjustment
dial
±3° Fine adjustments possible with adjustment
dial
±45 mm
12
Remark Reference
Page
See the fig‐
ure below
See the fig‐
ure below
p.40
s
p.40
s
p.40
s
See the fig‐
ure below
[Unit: mm]