Specifications - Epson dreamio EMP-DM1 User Manual

Specifications

Product name
Dimensions
Panel size
Display method
Resolution
Focus adjustment
Zoom adjustment
Lamp (light
source)
Power supply
Power
consumption
Operating altitude
Operating
temperature
Storage
temperature
Weight
Connectors
Speakers
Audio output
* The USB ports may not accept all USB-compatible devices.
Tilted angle
70
EMP-DM1
320W x 135H x 230D mm (Including projections)
0.55" wide
Polysilicon TFT active matrix
409, 920 pixels (854W x 480H dots) x 3
Manual
Digital type (Approx. 1:1.35)
UHE lamp, 120W, Model No.: ELPLP44
100 - 240VAC +/-10%, 50/60Hz, 2.2 to 1.0A
100 to 120VAC area Operating: 200 W
Standby: 5 W
220 to 240VAC area Operating: 200W
Standby: 5 W
Altitude: 0 m to 2286 m
+5 to +35ºC (No condensation)
-10 to +60ºC (No condensation)
Approximately 3.8 kg
Input Audio port
Video port
Component port
Computer port
USB port
Output Digital Coaxial Audio-Out
port
Headphone jack
Maximum input 8W, Rated impedance 12 Ω ohms
Analog 1 speaker system:Practical, maximum output 8W + 8W (10% THD)
audio
1 headphone system: 25 mW/32 Ω ohms
output
Dynamic range: 70 dB or more
Digital
audio Digital coaxial output
output
TM
Pixelworks DNX IC is installed in this unit.
The unit may fail or may cause an accident if it is tilted more than 15 degrees.
1 RCA pin jack
1 RCA pin jack
1 RCA pin jack
1 Mini D-Sub 15-pin
1 Type A
1 RCA pin jack
1 3.5 mm mini-jack