Epson EB-1430Wi Installation Manual page 56

Installation Guide
c
Supply power using the batteries supplied (x2)
Caution
Before handling the batteries, read the Safety Instructions on the Document CD-ROM.
c
•
Obtain two AA size manganese or alkaline (recommended) batteries. Do not use any other type
of battery. Rechargeable batteries cannot be used.
•
When supplying power from the projector, connect the optional Remote control cable set
(ELPKC28) to the projector's Remote port and the Control Pad's Remote port. When supplying
power from the projector, do not install batteries in the Control Pad.
d
Connect the Control Pad ports to the cables connected to the projector as necessary.
See the following for the cable connection methods.
"Necessary cables when installing the Control Pad"
s
e
Stick the port protection stickers supplied on the ports that are not being used by the
Control Pad.
f
Attach the cable cover
p.28
55