Control Pad; Touch Unit (Eb-1430Wi Only) - Epson EB-1430Wi Installation Manual

Installation Guide

Control Pad

The following supplied products are necessary when attaching the Control Pad. Confirm that you have all
items before beginning.
Control Pad main unit
When installing the Control Pad on a wall and so on, prepare commercially available M4 screws (20 mm x4).

Touch Unit (EB-1430Wi only)

The following supplied products are necessary when attaching the Touch Unit. Confirm that you have all
items before beginning.
Touch Unit/Markers x2 (attached to Touch Unit)
Spacer for screw hole x3
When installing the Touch Unit on a non-magnetic surface, prepare three M4 screws.
AA size batteries
(x2)
Label x4 Tape (approx. 6 cm) for secur‐
ing the marker x12
11
Rubber feet Port protection
stickers
Touch Unit connection cable
Infrared deflector
(approx. 28.5 cm) x8