Front Panel - Dell Dimension 9200C Service Manual

Removing and Installing Parts: Dell Dimension 9200C Service Manual
9. Connect your computer and devices to electrical outlets, and then turn them on.
10. Enter system setup (see
11. Properly dispose of the old battery.
See the Product Information Guide for battery disposal information.

Front Panel

1. Follow the procedures in
2. Remove the CD/DVD drive (see
3. Remove the optional Media Card Reader (see
4. Remove the optional floppy drive (see
5. Use a screwdriver to press in against the locking tab that secures the computer base until it releases the surrounding
metal.
6. Slide the base towards the rear of the computer, then pull it towards you to remove it.
1 front panel door release button
7. Open the front panel door by pressing its release button.
8. Grasp the panel that surrounds the door release button where it meets the front panel and pull it towards you to
remove it.
9. Unscrew the two screws located beneath the release button panel.
10. Unscrew the screw that secures the top of the front panel from the inside of the computer chassis.
11. Unscrew the two screws that attach the front panel to the base of the computer.
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
Entering System Setup) and restore the settings you recorded in
Before You Begin.
Removing a CD/DVD
Removing a Media Card
Removing a Floppy
Drive).
Reader).
Drive).
step 1.