Table of Contents
Advertisement
Removing and Installing Parts: Dell Dimension 9200C Service Manual
1. Follow the procedures in
2. Remove the CD/DVD drive, if installed (see
3. Gently slide the floppy drive into place until you hear a click or feel the drive securely installed.
4. Attach the interface cable to the system board (see
1
cable release tab
5. Check all cable connections, and fold cables out of the way to avoid blocking the fan and cooling vents.
6. Replace the CD/DVD drive (see
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
Before You
Begin.
Removing a CD/DVD
2
interface cable edge connector
Installing a CD/DVD
Drive).
System Board
Components).
3
interface cable
Drive).
Advertisement
Table of Contents
