Playback Using The Remote Control - JVC GZ-MG70E Instructions Manual

M5E6PAL.book Page 27 Friday, August 26, 2005 8:16 PM

Playback Using the Remote Control

The full-function remote control unit can operate
this camera from a distance as well as the basic
operations (playback, stop, pause, fast-forward
and rewind) of your VCR.
Installing the Battery
The remote control uses
one lithium battery
(CR2025).
1
Pull out the battery
holder by pushing the lock
tab.
Lock tab
2
Insert the battery in the
holder, and be sure to have the "+" mark visible.
3
Slide the holder back in until you hear a click.
Beam Effective Area
When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam's
approximate effective distance
for indoor use is 5 m.
Use the remote control in front
of the camera facing toward
the lens.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
VIDEO RECORDING & PLAYBACK
Buttons and Functions
2
1
1
A
Infrared Beam Transmitting Window
Transmits the beam signal.
B
ZOOM (T/W) Buttons
Zoom In/Out (
C
Up Button
Rotate Button (clockwise) (
D
Skip Backward Button
E
Left Button
F
Back Button
G
PLAYLIST Button (
H
START/STOP Button
I
SNAPSHOT Button (
J
INFO Button (
K
Skip Forward Button
L
PLAY/PAUSE Button
Remote sensor
M
Right Button
N
Next Button
O
Down Button
Rotate Button (counterclockwise) (
P
INDEX Button
Q
DATE Button
MasterPage: Basic_Right
27
EN
pg. 23)
pg. 30)
pg. 42)
pg. 28)
pg. 38)
pg. 30)