Date/Time Settings; Brightness Adjustment Of The Display - JVC GZ-MG70E Instructions Manual

M5E6PAL.book Page 18 Friday, August 26, 2005 8:16 PM
18 GETTING STARTED
EN

Date/Time Settings

The recording start date/time is recorded on the
video/still image file and it can be checked by
pressing INFO/ during playback.
( pg. 24, 29)
In addition, you can find the desired file by the
date index screen. ( pg. 30)
1
Set the power switch to
2
Press MENU. The menu screen appears.
3
Press / to
select [DISPLAY], then
press 49.
4
Press / to
select [CLOCK
ADJUST], then press
49. The day is
highlighted.
5
Press / to input
the day, then press 49.
Repeat to input the
month, year, hour and
minute.
6
Press MENU to
return to the normal screen.
Built-in Clock's Rechargeable Lithium
Battery
If the camera is not used for approx. 3 months,
the clock's lithium battery will become
discharged and the date/time stored in memory
will be lost. When this occurs, first connect the
camera to an AC outlet using the AC adapter for
over 24 hours to charge the clock's rechargeable
lithium battery. Then perform the date/time
setting before using the camera.
Note that the camera can be used without
setting the date/time.
Brightness Adjustment of the
Display
The brightness of the display can be adjusted.
1
Set the power switch to
pressing down the lock button located on the
switch.
2
or .
Open the LCD monitor fully. (
3
Press MENU. The menu screen appears.
4
Press
CAMERA SETTING
BASIC SETTING
49.
REC MEDIA SETTING
5
Press
DISPLAY
QUALITY
[BRIGHT], and press 49.
WIDE MODE
The brightness control
WIND CUT
indicator appears.
6
Press
SCENE COUNTER
is reached.
LANGUAGE
7
CLOCK ADJUST
Press 49 to clear the brightness control
BRIGHT
indicator from the display.
DATE/TIME
CLOCK ADJUST
DATE TIME
31 01 2005 11 07 :
MasterPage: Body_Left
or while
pg. 9)
/ to select [DISPLAY], then press
/ to select
/ until the appropriate brightness