JVC GZ-MG70E Instructions Manual page 49

M5E6PAL.book Page 49 Friday, August 26, 2005 8:16 PM
REMOTE
OFF: Makes the camera not to receive the signal
from the remote control.
[ON]: Enables the operation with the remote
control.
DROP DETECTION
OFF: Disables the function.
[ON]: Turns off the power automatically to
prevent HDD damage when the camera is
accidentally dropped. ( pg. 21)
CAUTION:
Setting this function to off increases the chances of
damaging the internal hard disk if the camera is
accidentally dropped.
REC MEDIA SETTING
VIDEO MODE Media selection can
be set for each
[HDD] / SD
recording and
IMAGE MODE
playback mode: video
(
[HDD] / SD
(
HDD: The built-in hard
disk is selected as a
recording medium.
SD: SD card is
selected as a
recording medium.
FORMAT
[HDD] / SD
You can format (initialise) the built-in hard disk or
SD cards. ( pg. 20)
CLEAN UP
[HDD] / SD
Writing speed of recording media tends to
become slow after long period of repeated use.
To regain the speed, execute cleanup
periodically. ( pg. 40)
COPY/MOVE
[COPY] / MOVE
You can copy or move still image files between
the built-in hard disk and SD card. (
NO. RESET
[VIDEO] / IMAGE
By resetting the file number (name), a new folder
will be made. The new files you are going to
make will be stored in the new folder. (
BRIGHT
When this item is selected, the brightness
control indicator appears. Adjust the brightness
of the display using
( pg. 18)
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx.
5 seconds in the following cases.
When the power switch is set from OFF to
When playback starts
When the date is changed during playback
ON: The date/time is always displayed.
NOTES:
) or still image
).
Only the date is displayed for the video playback.
You can set to different setting for each mode
(video recording/playback and still image
recording/playback).
SCENE COUNTER
[OFF]: Disables the function.
ON: Displays the counter during video mode.
LANGUAGE
[ENGLISH] / FRANÇAIS / DEUTSCH /
ESPAÑOL / ITALIANO / NEDERLANDS /
РУССКИЙ
The language setting can be changed.
( pg. 17)
CLOCK ADJUST
"Date/Time Settings" (
pg. 41)
MasterPage: Menu_Right
MENU SETTINGS 49
EN
pg. 42)
DISPLAY
/ , then press 49.
pg. 18)