Table of Contents
Advertisement
Playback Using The Remote
Control
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(
pg. 26)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1
Pull out the battery
holder by pushing the lock
tab.
2
Insert the battery in the
holder, and be sure to
have the "+" mark visible.
3
Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam's
approximate effective
distance for indoor use is
5 m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
2
1
3 3
1
Lock tab
Remote sensor
VIDEO PLAYBACK
Buttons And Functions
A
Infrared beam transmitting window
● Transmits the beam signal.
The following buttons are available only when
the camcorder's Power Switch is set to "PLAY".
B
PAUSE Button
● Pauses the tape (
Up Button (
pg. 27)
C
SLOW Rewind Button (
D
REW Button
● Rewind/Reverse Shuttle Search on a tape
(
pg. 22)
● Displays previous file in a memory card*
(
pg. 30)
Left Button (
pg. 27)
E
INSERT Button (
F
SHIFT Button (
pg. 27)
G
DISPLAY Button (
H
SLOW Forward Button (
I
PLAY Button
● Starts Playback of a tape (
● Starts Auto Playback of images in a memory
card* (
pg. 30)
J
FF Button
● Forward/Forward Shuttle Search on a tape
(
pg. 22)
● Displays next file in a memory card* (
Right Button (
pg. 27)
K
A. DUB Button (
L
STOP Button
● Stops the tape (
● Stops Auto Playback* (
Down Button (
pg. 27)
M
EFFECT Button (
N
EFFECT ON/OFF Button (
EN
pg. 26)
pg. 26)
pg. 56)
pg. 23, 52)
pg. 26)
pg. 22)
pg. 30)
pg. 55)
pg. 22)
pg. 30)
pg. 27)
pg. 27)
CONTINUED ON NEXT PAGE
25
Advertisement
Table of Contents
