Appendix B The Parameter List; Editing The Configuration Parameters - Axis 540 series User Manual

Appendix B The Parameter List

Editing the Configuration Parameters

Editing using
AXIS NetPilot
Editing using a
Web browser
AXIS 540/640 User's Manual
This appendix provides an overview of the AXIS 540/640 parameters
and describes how they may be edited. A sample parameter list is also
included. However, please note that because of recent print server
software updates, some differences may exist between the parameters
installed on your print server and those that are described within this
document.
Please refer to the AXIS Network Print Server Technical Reference for
a complete description of the parameters. Alternatively, you may wish
to access the Axis WWW Home Page at http://www.axis.com/, where
you can down-load the latest technical information. For details of the
appropriate WWW address in your region, please refer to Appendix E -
How To Contact Axis.
All parameter settings are stored in the AXIS 540/640 config file,
which may be edited via the Property Pages of the AXIS NetPilot
software. Each Property Page comprises an array of selection tabs that
are appropriate to your operating environments. Each parameter may
be defined by using the relevant box. For further information on the
Property Pages, please refer to Section 3 - Setting Up - NetWare.
If your network supports TCP/IP you may view and edit the AXIS
540/640 parameter list using any standard Web browser.
Appendix B: The Parameter List
97