Connecting To The Telephone Line; Digital Interface - Pace Sky plus User Manual

SCART
lead
second
TV
Sky+ set
WARNING!
DISCONNECT FROM MAINS SUPPLY
BEFORE REMOVING COVER
NO USER SERVICEABLE PARTS INSIDE
top box
rear
230V 0.3A 50Hz
panel
mains
lead
With the exceptions of the mains and the telephone line, all the
interconnections between the rear panel of your Sky+ set top box and
your other equipment are safe, extra-low voltage circuits.

❖ Connecting to the telephone line

The telephone lead (labelled in the diagram above) is intended for
connection to standard analogue UK telephone lines. This lead and
your Sky+ set top box have been specifically designed for this
purpose. Do not attempt to connect the telephone lead to anything
other than a standard UK telephone line.

❖ Digital interface

On the rear panel of your Sky+ set top box there is a plate, which
covers a general-purpose interface. This is for future plug-in modules,
which will have their own installation instructions. Only plug-in
modules that are authorised by Sky must be used. You must
disconnect your Sky+ set top box from the mains before
removing the plate or plugging in a module.
70
TV
RF lead
RF OUT - 2
9V DC 50mA max.
FAN
TELEPHONE
DO NOT OBSTRUCT LINE
AIR VENTS!
telephone lead
RF lead
terrestrial aerial
RF lead
video recorder (VCR)
SCART
RF lead
lead
RF OUT - 1
VCR SCART
AUDIO
OUT
L
TV SCART
R
AERIAL IN
S-video lead satellite
dish
13/18V DC 13/18V DC
350mA max. 350mA max.
RS-232
DISH INPUT 2 DISH INPUT 1
DIGITAL INTERFACES
WARNING!
DISCONNECT RECEIVER FROM THE
OPTICAL
MAINS BEFORE REMOVING.
AUDIO OUT
ACCURATELY FOLLOW THE MODULE
S-VIDEO INSTALLATION INSTRUCTIONS.
DIGITAL INTERFACES
DOLBY
5V DC 600mA max. 3V3 DC 1.2A max.
phono optical digital-
leads
audio lead
stereo hi-fi system and/or
digital-audio decoder and
amplifier/speakers
Sky+ User's Guide