Replacing The Batteries In Your Sky+ Remote Control - Pace Sky plus User Manual

❖ Replacing the batteries in your Sky+
remote control
When the batteries in your Sky+ remote control need replacing, you
will require two new AA (MN1500, LR6 or UM–3) batteries. A
warning message will appear on-screen advising you that it is time to
replace the batteries.
To replace the batteries:
1. Hold the upper, silver part, of your Sky+ remote control in one
hand. With your other hand, push the catch on the battery
cover upwards and remove the cover by pulling it outwards.
2. Remove the old batteries from the battery compartment.
3. Fit the new batteries, ensuring that you match the + and –
marks on the batteries to their respective marks inside the
battery compartment.
4. Refit the battery cover, ensuring that the two lugs on the cover
engage correctly in the casing, and that the bottom catch clicks
into place.
Don't leave flat batteries in your remote control.
Replace both batteries at the same time.
If you leave your Sky+ remote control without batteries for more than
10 minutes, your remote control settings for operating your TV will be
lost. In this case, after replacing the batteries, you will be able to
control your Sky+ set top box as normal, but you will have to reset
your Sky+ remote control to operate your TV. For more information,
see Setting your Sky+ remote control to operate your TV on page 58.
60 Sky+ User's Guide