Table of Contents
Advertisement
Chapter 7
Thomson Gateway Wireless Configuration
Configuring your access point settings
To configure the basic settings for your AP:
1
In the Thomson Gateway menu click Home Network.
2
Under Wireless, click the AP that you want to configure.
3
Click Configure to display the Configure page.
Configure page
On the Configure page you can configure:
>
General settings
>
Security settings
General settings
>
Enable/disable the wireless interface.
>
Change the wireless network name.
>
Change the interface type. Select one of the following 802.11 standards:
802.11b
Only stations that are configured in 802.11b mode can associate.
802.11b(legacy)/g
This is a special compatibility mode for 802.11b/g and is in fact designed for older types of b-stations.
Use this mode only in case you would be experiencing connectivity problems in combination with
some particular wireless stations.
E-DOC-CTC-20060609-0001 v2.0
57
Hide quick links:
Advertisement
Table of Contents
