Bulbs - HYOSUNG GT650 Owner's Manual

BULBS

WARNING
Keep fuel and other flammable sub-
stances away from electric components.
CAUTION
Before changing a bulb, set the ignition
switch to position "OFF" and allow a few
minutes for the bulb to cool down.
Wear clean gloves or use a clean, dry
cloth to handle the new bulb.
Do not put your fingerprints on the bulb,
as this may lead to overheating and fail-
ure.
If you have handled the bulb with bare
hands, clean it with alcohol to avoid any
damage.
DO NOT PULL ON THE WIRES.
N O T E
Before changing a bulb, check the fuses.
INSPECTION OF LAMPS
Check if the head lamp, position lamp,
meter lamp, tail lamp and license plate
lamp work well when the ignition switch
was turned to the "ON" position.
Check if the brake lamp work well when
the front brak lever or rear brake pedal
was operated.
Check if the turn signal lamp work well
when the turn signal switch was operat-
ed.
Check if the head lamp, tail lamp, turn
signal lamp and brake lamp are dusty or
damaged.
Brake / Tail lamp
84
&
Head lamp
Turn signal lamp
License
plate lamp
Turn signal lamp