Table of Contents
Advertisement
◎
Though wireless communications support the
security functions that conform to standard
®
Bluetooth
and wireless LAN specifications,
this level of security should not be considered
to be sufficient for certain usage environments
and setups. Be sure to exercise caution
whenever performing Bluetooth
LAN data communications.
◎
Wireless LAN uses radio waves to exchange
data, which means you can easily establish
a LAN connection with any device within the
range of the radio waves. However, it also
means that if you do not configure security
settings, a third party with bad intentions will
be able to illegally access communications,
etc. You are fully responsible for decisions
concerning security, but it is recommended
that you configure security settings before
using wireless LAN.
◎
KDDI shall not be held in any way liable for
leaks of data or information that occur during
Bluetooth
®
and wireless LAN communications.
54
◎
®
and wireless
The product uses the 2.4 GHz frequency
band for Bluetooth
LAN functions.
®
Bluetooth
and wireless LAN use the same
wireless frequency band, so attempting to
use both of them at the same time can result
in interference between radio signals, low
communication speeds, and disconnection
of the network. If you experience connection
problems, stop using either Bluetooth
wireless LAN.
®
functions and wireless
• Bluetooth
®
Function: 2.4FH1
The product uses the 2.4 GHz
frequency band. FH-SS modulation
is used, and the interference
distance is approximately 10
meters.
Moving object detection device
bands cannot be avoided.
®
or
Advertisement
Table of Contents
