Table of Contents
Advertisement
• Backup of important data is recommended
before performing a software update
operation. Note that you may not be
able to back up certain downloaded
data. Though the update operation is
designed to retain the data registered on
the product prior to the update, product
malfunction or other conditions could
possibly cause data to be lost. Note
that KDDI shall not be held in any way
responsible for losses suffered due to loss
of data.
• Note that KDDI shall not be held in
any way responsible for any software
update-related losses due to any type of
malfunction, operational fault, software
setup, modification of specifications, or
any other reason, or for any expenses
incurred for the purpose of recovering
such losses.
• Never remove the battery pack or turn
off the power while a software update
operation is in progress. Doing so may
cause the update to fail.
• If a software update operation fails or
is stopped part way through, execute it
again.
• If you fail to update software, it may
become impossible to operate the product.
If this happens, bring it to an au shop or
PiPit (not accepted by some shops).
memo
◎
If the product does not restart after a software
update operation, remove the battery pack,
reinstall it, and then turn on power. If that does
not restart the product, take it to an au shop
or a PiPit shop. (Some PiPit shops may not be
able to provide the required service.)
159
Advertisement
Table of Contents
