Sensor Setup - Honeywell HNDR series User Manual

7. Sensor Setup

1
2
1
[Sensor information]
• Use: Verify whether specific sensor are used.
• Location: Verify the locations of the sensors.
• Type: Verify the sensor types (N.C., N.O. ).
• Camera#: Verify the connected cameras.
• Check time: Verify the check time settings of the sensors.
• Output relay: Verify the output relay port settings.
• Latch time: Verify the latch time settings.
• Preset : Verify the preset of ptz camera settings. ( ex. HSDN-251 )
2
[Sensor input information]
• Use sensor: Select to use the sensor.
• Sensor location: Specify the location of the sensor. (Use 8 characters or less.)
• Sensor type: Specify the sensor type ( N.C, N.O ).
• Connected camera: Specify the camera to connect.
• Check time: Set check time of the sensor.
3
[Output Relay]
• Select output ports ( Relay 1 ~4).
4
[Latch time]
• Specify the time for relay operation.
5
[Pan/Tilt Preset]
• Select preset to number (1~10) when camera can use preset function.
3
4
37