Using Timer Play - Yamaha DKC-850 Operation Manual

2
Press [+/YES] and [–/NO] to change the audio pan.
=CD=
AudioPan=Left
The following pan settings are available:
Option Description
Left Audio of the L channel is output to both of the L and R
channels.
Center Audio of the L channel is output to the L channel, and the
R channel is output to the R channel.
Right Audio of the R channel is output to both of the L and R
channels.

Using Timer Play

[SETUP] "TimerPlay"
You can program your Disklavier to start or stop playback of a song at
various specified times. All you need to do is register up to a maximum of
99 timer settings, and your Disklavier will perform them unattended. This
function is called "timer play."
■ Setting the Timer Play
1
Press [SETUP] on the remote control.
The setup menu screen appears.
=SETUP MENU=
*TimerPlay
*MIDI
-+ENT
(1/2)
*AudioI/O
*M-Tune
Advanced Song Playback
Note:
The internal calendar must be set in
advance in order for the timer play
to function. See Chapter 2 "Getting
Started – Setting the Internal
Calendar" on page 16.
Note:
The control unit must be turned on
in advance in order for the timer
play to function. The timer play
cannot turn on/off the control unit.
Chapter
6
51