Searching A Specific Section Of A Song - Yamaha DKC-850 Operation Manual

Searching a Specific Section of a Song

During playback or stop/pause mode
Playback can be started from a specified point in a song. Instead of using
fast forward or preview, you can use this function to go directly to a desired
point within a song.
If the current song uses the minutes and seconds time format, you specify
the point in minutes and seconds. If it uses the measures and beats time
format, you specify the point in measures and beats.
1
Press [SEARCH] on the remote control.
The song search screen appears with the counter flashing.
Memory
A02-001
<00:00>
Flashes
The song will be paused at the exact point as you press [SEARCH].
2
Enter the time that you want to search for with the number
keypad.
For example, to search for 2:56 (minutes and seconds), first press
[0], then [2], [5], and [6].
For example, to search for 52-3 (measures and beats), first press
[0], then [5], [2], and [3].
3
Press [SEARCH] again.
The position of the song goes to the specified point.
[SEARCH]
0-9/SEARCH
iano Sonate
Memory 0-9/SEARCH
A02-001
iano Sonate
<02:56>
Memory 0-9/SEARCH
A02-001
iano Sonate
<052-3>
Basic Song Playback
Note:
If you enter a value higher than the
entire song time, the search goes to
the end of the song.
Chapter
3
29