THOMSON ST605 Installation And Setup Manual page 30

Installing your wireless client adapter
Proceed as follows when the Home Install Wizard prompts you to plug in the wireless client adapter:
1 Plug in the wireless client adapter. The hardware is being installed.
2 Enter your Thomson Gateway's serial number and click Next.
i
Your Thomson Gateway's serial number is a 13-digit key printed on the bottom label of your
Thomson Gateway.
A progress window appears, showing the setup of the wireless connection to your Thomson Gateway.
3 Continue with "Configuring the Internet connection" on page
24
Basic Installation
12.
E-DOC-CTC-20060911-0089 v1.0
Chapter 2