THOMSON ST605 Installation And Setup Manual page 18

Configuring the Internet connection
Proceed as follows:
1 If prompted, enter the User name and Password for your Thomson Gateway security settings and click
OK.
i
The factory default user is 'Administrator' and its password is blank. It is advisable to specify
another user name and password during the configuration procedure to protect your Thomson
Gateway from security violation. See
2 Select the appropriate Region, Provider and Service for your Internet connection as specified by your
Internet Service Provider and click Next.
3 Your connection to the Internet connectivity is set up:
Select the VPI/VCI - and, if required, the Connection Type - as specified by your Internet Service
Provider and click Next.
Enter the User Name and Password for your Internet account settings as specified by your Internet
Service Provider and click Next.
4 The procedure continues with some additional configurations.
Proceed with " Configuring the Thomson Gateway (and your computer)" on page
12
"2.6 Basic Security" on page 25
Chapter 2
Basic Installation
for more information.
13.
E-DOC-CTC-20060911-0089 v1.0