Disassembly and Reassembly > Disassembly
(8) Lens Cover and Front Case
1) Remove the screw [L].
2) Remove the lens cover (a) in the direction of the arrow. Do not tilt the lens cover when removing
the lens cover: Doing so could damage its claw.
3) Open the jack cover (c), and then remove the screw [A] and screw [L].
4) Remove the screw [C].
5) Remove the FRT-M circuit board (d) from AEL circuit board (e) in the direction of the arrow.
6) Remove the AVJ-M circuit board (e) from AEL circuit board in the direction of the arrow.
7) Remove the front block in the direction of the arrow.
Good
(a) Lens cover
(b) Front cover
(c) Jack cover
(d) FRT-M circuit board
(e) AVJ-M circuit board
(f) AEL circuit board
[DZ-MV780A]
No
good
Tab of the
Tab of the
lens cover
lens cover
(b)
1) [L]
2)
(a)
(c)
3) [L]
Fig. 5-3-8
5 - 8
4) [C]
(d)
5)
5)
6)
(e)
7)
3) [A]
(f)
[A] M1.7×4 (Black)
[C] M1.7×4 (Silver)
[L] M1.7×3 (Silver)