List Of Jigs And Tools Used When Creating Reference Data - Hitachi DZ-GX20A Service Manual

Adjustment > Creating Reference Data

6-1-1 List of Jigs and Tools used when Creating Reference Data

NEW
Adjustment floppy disk
Note:Create the data using the adjustment data
downloaded from Internet. If downloading
is not possible,
call 1-800-HITACHI to find
out where to send the product for repair.
Personal computer (PC)
Computer on which any of the following OS operates and which has a
floppy disk drive and RS-232C terminal
OS: Windows 95/98/98 Second Edition/Me/2000 Professional/XP/NT4.0
C12 light balancing filter
(Diameter: 46mm)
(Generally available)
RS-232C cable (9-pin or 25-pin straight type)
[Generally available]
Check the number of pins of RS-232C
terminals on PC and DSP-R jig and the
shapes (male/female) before purchasing.
Power cable for AC
adapter/charger
[Accessory] (*2)
*1: The adjustment program used on DVD video camera/recorder is exclusively for Windows
95/98/98 Second Edition/Me/2000 Professional/XP/NT4.0: The program cannot be run on
MS-DOS.
*2: The part numbers of AC adapter/charger and power cable are different depending on the
destination: Refer to the "Replacement Parts List" for the part numbers.
(*1)
DC power cord
[Accessory: Parts
No. EV11011]
6 - 2
NEW
Halcyon connector
Parts No. TP14391
DSP-R jig
Parts No. 7099448
AV/S input/output or
output cable
[Accessory: Parts
No. EW12525]
DZ-ACS2
AC adapter/charger
(*2)
[Accessory]
CH 1