Hitachi DZ-GX20A Service Manual page 41

Troubleshooting > Messages and Troubleshooting
Message
Same scenes on Play List
will be deleted.
Delete scenes?
YES NO
Scenes over limit.
Cannot add scene.
Scenes over limit.
Cannot divide scene.
Scenes over limit.
Cannot move scene.
Stop processing.
There was no scene which
can be deleted.
This card cannot be used.
Please replace card.
This disc cannot be used.
Please replace disc.
This disc is recorded by the
PAL system.
Please replace disc.
Top scenes cannot be
divided.
UNFORMAT DISC
Cause/condition for
message to appear
This message appears during user
operation, if even one play list has been
created during scene deletion. This
message does not appear when a scene is
deleted from play list.
Appears if an attempt is made to register
a new scene in play list, with the
specified 999 upper limit scenes
registered. [Refer to *1 page 4-8]
Appears if an attempt is made to divide a
scene with the specified 999 upper limit
scenes registered, or the number of
scenes will exceed 999 with division.
[Refer to *1 page 4-8]
Appears if an attempt is made to move a
scene at the upper limit of 999 scenes
registered, or the number of scenes will
exceed 999 by moving a scene. [Refer to
*1 page 4-8]
This message appears during operation
process. It will appear when user
interrupted any process by pressing the
stop/cancel button when processing
multiple scenes, etc.
Appears when only multiple locked
scenes were selected using the Disc
Navigation function, and deleting them
was attempted.
Appears when a card other than SD
memory card was loaded.
Appears when a type of disc that cannot
be used on the DVD video camera/
recorder was loaded.
Appears when a disc recorded in the PAL
system was loaded: This DVD video
camera/recorder is exclusively for the
NTSC system and does not comply with
the PAL system.
Appears when the first image of scene
was selected to divide the scene: The
specifications state that dividing a scene
at its top is not possible.
Appears when an unformatted or
logically damaged disc was loaded.
Also appears when a dirty disc was
loaded.
4 - 16
Troubleshooting
Choose "YES" and designate it to
delete selected scenes.
Delete unnecessary scenes from play
list before adding a new scene to it.
Delete unnecessary scenes before
dividing a scene.
Delete unnecessary scenes before
moving scenes.
Operate the DVD video camera/
recorder after the message
disappears.
Use the Disc Navigation function to
unlock the scenes, and then restart
operation.
Insert an SD memory card.
Check the type of disc and insert a
disc usable on the DVD video camera/
recorder.
Use a disc recorded in the NTSC
system.
Stop trying to divide a scene.
Format the disc (deleting all recorded
data), or replace the disc.
Refer to "4-4-4 Cleaning disc and
optical pickup" and clean the disc.
Or replace the disc.