L Block [Dz-Gx20A/Mv730A] - Hitachi DZ-GX20A Service Manual

Disassembly and Reassembly > Disassembly
(5) L Block
[DZ-GX20A/MV730A]
1) Remove the three screws [A].
2) Remove the two screws [B].
3) Remove the two screws [C].
4) While pushing the upper part of EVF unit on
the L case, open the L block (a) in the
direction of the arrow, making sure that the
two flat cables and the other two cables
(speaker cables) between the L block and R
block (b) are not disconnected.
5) Unplug the connector of speaker cables (c).
6) Disconnect the two flat cables.
Caution during disassembly and reassembly:
Securely plug in the connector of speaker
cable and connect the two flat cables.
(1)
(2)
(a) L block
(b) R block
(c) Connector of
speaker cables
[A] M1.7×4 (Black)
[B] M1.7×2.5
(Black)
[C] M1.7×4
(Silver)
(1) Unlock
(2) Remove
Fig. 5-3-5
Top
side
2) [B]
Front
left
side
Bottom
side
Detailed view of screw positions
(b)
1) [A]
1) [A]
2) [B]
6)
6)
5 - 5
4) Push
1) [A]
Rear
side
3) [C]
5) (c)
1) [A]
(a)
4)
2) [B]
3) [C]