1B-16 AIR CONDITIONING (OPTIONAL)
4) Remove shims from shaft.
5) Using special tool (C), remove circlip.
Special Tool
(C): 09900-06107
6) Remove magnet clutch lead wire clamp screw, and remove
magnet clutch read wire ground terminal.
7) Remove magnet clutch with puller.
NOTE:
Be careful not to damage pulley when tapping magnet
clutch.
2
1. Puller
2. Compressor
8) Remove magnet clutch coil.
Special tool
(C): 09900-06107
INSTALLATION
1) Install magnet clutch coil.
Protrusion on under side of coil ring must match hole in com-
pressor assembly to prevent movement ant correctly locate lead
wire.
2) Using special tool (C), install snap ring as shown.
Special Tool
1. Snap ring
(C): 09990-06107
2. Clutch coil
3. Compressor
assembly
3) Install clamp portion and ground terminal of lead wire.