1B-10 AIR CONDITIONING (OPTIONAL)
LH steering vehicle
1. Cover
2. Filter
3. Evaporator assembly
LH steering vehicle
LH steering vehicle
1. Upper case
2. Evaporator
3. Lower case
4. Thermistor
5. Expansion valve
4) Disconnect suction pipe, and liquid pipe from evaporator (cool-
ing unit).
NOTE:
As soon as above hose and pipe are disconnected, cap
opened fittings so that moisture and dust may not enter
cooling unit.
5) Remove blower motor unit. Refer to Section 1A "HEATER AND
VENTILATION".
1. Suction pipe
2. Liquid pipe
6) Disconnect thermistor wire coupler.
7) Remove evaporator with evaporator case.
DISASSEMBLY
1) Remove filter assembly (if equipped).
2) Remove screws to separate evaporator upper and lower cases
from each other.
1. Screw
3) Remove upper case and remove evaporator from lower case.
1
4) Remove following components from evaporator.
Expansion valve
Thermistor