Suzuki Canvas SQ416 Service Manual page 18

LH steering vehicle shown
1
LH steering vehicle shown
1
LH steering vehicle shown
1. Ears
4) Remove filter cover.
1. Filter cover
5) Pull out filter element. Pull out upper filter first then the lower one.
1. Filter element
CLEAN
Blow off dust by compressed air from air outlet side of the filter ele-
ment.
1. Air flow
INSTALLATION
Reverse removal procedure for installation noting the followings:
Install filter into cooling unit directing arrow mark on its end face
to heater unit.
Enable air bag system after installation. Refer to ENABLING AIR
BAG SYSTEM in Section 10B.
EVAPORATOR (COOLING UNIT)
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Disable air bag system. Refer to "Disabling Air Bag System" in
Section 10B.
3) Recover refrigerant by using recovery and recycling equipment.
Be sure to follow the instruction manual for the equipment.
The amount of compressor oil removed must be measured and
the same amount added to the system.
AIR CONDITIONING (OPTIONAL) 1B-9