Conducting A Conference - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
>
Start conference?
>
Conference?
Program/Service
Return to held call?
Add party?
>
Conference?
Program/Service
>
View conf parties?
>
Exit list?

Conducting a Conference

In a conference call, you can talk to as many as four
other parties at the same time. These may be internal
or external users.
o
Call the first party.
:
Select and confirm.
o
Call the second station. Announce the conference.
:
Select and confirm.
or
qg
Press the key. The LED lights up. Enter the code. The
LED goes out.
A tone sounds every 30 seconds to indicate that a con-
ference is in progress. Contact your service personnel
for instructions on how to turn it off.
If the second party does not answer:
:
Confirm.
or
qd
Enter the code.
Adding Up to Five Parties
to the Conference (Initiator Only)
:
Confirm.
o
Call the new party. Announce the conference.
:
Select and confirm.
or
qg
Press the key. The LED lights up. Enter the code. The
LED goes out.
Checking Which Parties Are in the Conference
(Initiator Only)
:
Select and confirm.
The parties will be listed and displayed (list display
! Page 11).
u v
or Press these keys to select another party.
:
To exit the list: Select and confirm.
Making Calls – Convenience Functions
57