Conducting A Conference - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation

Conducting a Conference

In a conference call, you can talk to as many as four oth-
er parties at the same time. These may be internal or
external users.
Lift the handset.
Call the first p arty.
Press the key. LED flashes.
Call the second station. Announce the conference.
Press the key. Enter the code. The LED goes out.
A tone sounds every 30 seconds to indicate that a con-
ference is in progress. Contact System Suppor t for in-
structions on how to turn it off.
If the second party does not answer:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key t wice.
Adding Up to
(Initiator Only)
Press the key. LED flashes.
Call the new p arty. Announce the conference.
Press the key. Enter the code. The LED goes out, etc.
Leaving a Conference
Replace the hand set.
Ending a Conference (Initiator Only)
Press the key. LED flashes. Enter the code.
Removing the ISDN Central Office Party
From the Conference (Only for U.S.)
Press the key. LED flashes.
Enter the code.
Calling Multiple Parties Simultaneously
Five to the Conference
21