Event Log Search; Figure 73 - Event Log Search Screen - Eneo DLR4B-08/500DV Operating Instructions Manual

Operating Instructions
 A–B Clip-Copy: Selecting A–B Clip-Copy will set the starting point of the video to be clip copied,
and the
will set the ending point of the video to be clip copied and displays the Clip-Copy screen.
 Clip-Copy: Select Clip-Copy, and the Clip-Copy screen appears to allow clip copy setup.
 Print: Selecting Print allows you to print a selected image.
Camera Menu
Selecting (Camera Menu) in the Search menu displays the following Camera Menu.
 Zoom: Selecting Zoom and choosing the camera number zooms the current playback image of
the selected camera on the screen. It is the same as pressing the
again exits the Zoom mode.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
search mode.
Alarm Reset
Selecting (Alarm Reset) in the Search menu resets the DVR's outputs including the internal buzzer during an alarm.
It is the same as pressing the
Panic
Selecting (Panic) in the Search menu starts panic recording of all cameras, and selecting
recording. It is the same as pressing the
Data Source
Selecting (Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
searches recorded data on primary storage installed in the DVR, and selecting Other searches recorded data on storage
used for another DVR then installed in this DVR.
Exit
Selecting (Exit) in the Search menu exits the search mode and enters the live monitoring mode.

Event Log Search

Figure 73 — Event Log Search screen.
NOTE: It is possible that no recorded image displays on the current screen. Press the
change the screen mode to 4x4. You will be able to easily see the camera have recorded video during
target time.
56
icon displays at the bottom-left corner of the screen. Selecting A–B Clip-Copy again
button.
ALARM
button.
PANIC
The DVR maintains a log of each time the Alarm Input port
is activated. The Event Log Search screen displays this list.
Use the arrow buttons to highlight the event for which you
would like to see video.
The Event Log Search screen can also be accessed by
pressing the button unless there is an alarm. There is
ALARM
no determined user authority to display the Event Log Search
screen, however, the event video will not be played unless a
user with Search authority logs into the system .
Pressing the (Play/Pause) button will extract the event video
and display the first image of the event. Pressing the
will start playing the "event" video segment. Pressing
returns to live monitoring.
PLAYBACK
button. Selecting Zoom
ZOOM
again stops panic
button
button and
DISPLAY