Table of Contents
Advertisement
User's Manual
Event Log Search
Figure 45: Event Log Search screen.
The DVR maintains a log of each time the Alarm Input port is activated. The Event Log Search screen displays this
list. Use the arrow buttons to highlight the event for which you would like to see video.
There is no determined user authority to display the Event Log Search screen, however, the event video will not be
played unless a user with Search authority logs into the system .
Pressing the
(Play/Pause) button will extract the event video and display the first image of the event. Pressing
the
button will start playing the "event" video segment. Pressing
returns to live monitoring.
SEARCH
NOTE: It is possible that no recorded image displays on the current screen. Press the
button and change
DISPLAY
the screen mode to 4x4. You will be able to easily see the camera have recorded video during target time.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside From and press the
button to toggle between On and Off. When set to Off, you can
enter a specific Date and Time. When set to On, the search will be from the first recorded image. When highlighting
and pressing the
button the bookmark list displays and the bookmark point you selected will be the starting
date and time.
62
Advertisement
Table of Contents
