Event Log Search; Figure 68 - Event Log Search Screen - Eneo DLR4-08 Operating Instructions Manual

Panic
Selecting (Panic) in the Search menu starts panic recording of all cameras, and selecting
recording. It is the same as pressing the
Data Source
Selecting (Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
searches recorded data on primary storage installed in the DVR, and selecting Other searches recorded data on storage
used for another DVR then installed in this DVR.
Exit
Selecting (Exit) in the Search menu exits the search mode and enters the live monitoring mode.

Event Log Search

Figure 68 — Event Log Search screen.
NOTE: It is possible that no recorded image displays on the current screen. Press the
change the screen mode to 4x4. You will be able to easily see the camera have recorded video during
target time.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
Highlight the box beside Check Time Overlap and press the
be able to turn the Check Time Overlap on or off if a user-defined date and time is set to From and To. If the DVR's
date and time have been reset, it is possible for the DVR to have more than one overlapping start and stop time. When
set to On, you will be asked to select one of the overlapping start and stop time. When set to Off, the DVR will display
search results from all start times to all stop times.
Highlight the box beside Alarm-In and press the
in your search.
button.
PANIC
The DVR maintains a log of each time the Alarm Input port
is activated. The Event Log Search screen displays this list.
Use the arrow buttons to highlight the event for which you
would like to see video.
The Event Log Search screen can also be accessed by
pressing the
no determined user authority to display the Event Log Search
screen, however, the event video will not be played unless a
user with Search authority logs into the system .
Pressing the
and display the first image of the event. Pressing the
will start playing the "event" video segment. Pressing
PLAYBACK
You can search video from the first to last recorded images, or
you can set the start and stop times and dates.
Highlight the box beside From and press the
between On and Off. When set to Off, you can enter a specific
Date and Time. When set to On, the search will be from the first
recorded image.
Highlight the box beside To and press the
between On and Off. When set to Off, you can enter a specific
Date and Time. When set to On, the search will be from the last
recorded image .
button. It toggles between On and Off. You will only
button. You can select the alarm inputs that you want to include
Digital Video Recorder
again stops panic
button unless there is an alarm. There is
ALARM
(Play/Pause) button will extract the event video
returns to live monitoring.
DISPLAY
button
button and
button to toggle
button to toggle
51