Event Log Search; Figure 46 : Event Log Search Screen - Eneo DMR-5008/500 Operating Instructions Manual

User's Manual
Data Source
(Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
Selecting
searches recorded data on primary storage installed in the DVR, and selecting Archive searches archived data on secondary
storage installed in the DVR.
Exit
Selecting (Exit) in the Search menu exits the search mode and enters the live monitoring mode.

Event Log Search

The DVR maintains a log of each time the Alarm Input port is activated. The Event Log Search screen displays this
list. Use the arrow buttons to highlight the event for which you would like to see video.
The Event Log Search screen can also be accessed by pressing the
no determined user authority to display the Event Log Search screen, however, the event video will not be played unless
a user with Search authority logs into the system .
Pressing the button will extract the event video and display the first image of the event. Pressing the
button will start playing the "event" video segment. Pressing
NOTE: It is possible that no recorded image displays on the current screen. Press the
the screen mode to 4x4. You will be able to easily see the camera have recorded video during target time.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
58

Figure 46 : Event Log Search screen.

(Search/Stop) returns to live monitoring.
button unless there is an alarm. There is
ALARM
DISPLAY
(Play/Pause)
button and change