HYOSUNG XRX125sm Owner's Manual page 51

◉ ◉ CLUTCH CABLE ADJUSTMENT
● A basis adjustment be allowed by the
clutch lever adjuster ③ .
● Loosen the clutch lever adjuster lock nut
② and turn the clutch lever adjuster ③
or out to provide the specified play.
● After adjustment, tighten the lock nut ②
and cover the rubber boot ④ .
● If can't adjust by the adjuster ③ , loosen
the clutch cable adjuster lock nut ⑥ .
● Turn the clutch cable adjuster ⑤
to provide the specified play.
● After adjustment, tighten the clutch cable
adjuster lock nut ⑥ .
● The clutch cable should be lubricated
with a light weight oil whenever it is
adjusted.
Clutch cable play ① ①
in
in or out
4 mm (0.16 in)
50
DRIVE CHAIN
The chain may require more frequent
adjustment that it is with periodic
maintenance depending upon your riding
conditions.
Check the chain every 1,000km.
WARNING
Riding with the chain in poor condition
or improperly adjusted can lead to an
accident.
Inspect, adjust, and maintain the chain
properly before each ride, according to
this section.
◉ ◉ Insepcting the Drive Chain
Inspecting the chain, look for the following :
● Loose pins
● Damaged rollers
● Dry or rusted links
● Kinked or binding links
● Excessive wear
● Improper chain adjustment
If you find something wrong with the drive
chain condition or adjustment, correct the
problem if you know how. If necessary,
consult your authorized Hyosung dealer.
Damage to the drive chain means that the
sprockets may also be damaged. Inspect
the sprockets for the following :
● Excessively worn teeth
● Broken or damaged teeth
Loose sprocket mounting nuts
●