Philips AVENT SCD535 User Manual page 15

7.8 Temperature alert on/off
D
Note:
You can only switch the temperature alert on and
off in the menu of the parent unit.
D
Note:
If the temperature alert is activated too often,
reduce the set minimum temperature and/or
increase the set maximum temperature (see
'Setting room temperature range').
If the temperature alert is switched on, the parent
unit beeps if the actual room temperature exceeds
the set maximum temperature or drops below the
set minimum temperature. In addition, the backlight
of the parent unit display goes on, the temperature
alert symbol ( t
on the display. If no minimum and maximum
temperatures have been set, the temperature
alert is given when the room temperature drops
below 14°C or rises above 35°C.
Select 'Temperature' with the + and - buttons.
1
2
Select 'Alert' with the + and - buttons.
3
4
If the alert is off, the display shows 'On?'. Press
5
the OK button to switch on the alert. If the
alert is on, the display shows 'Off?'. Press the
OK button to switch off the alert.
7.9 Vibration alert on/off
D
Note:
You can only switch the vibration alert on and off
in the menu of the parent unit.
If the vibration alert is switched on, the parent
unit vibrates as soon as the fourth sound level
light lights up while the volume is switched off.
Select 'Alert settings' with the + and - buttons.
1
2
Select 'Vibration' with the + and - buttons.
3
4
If the vibration alert is off, the display shows
5
'On?'. Press the OK button to switch on the
vibration alert. If the vibration alert is on, the
display shows 'Off?'. Press the OK button to
switch off the vibration alert.
14
7.10 Setting display language
Select 'Settings' with the + and - buttons.
1
2
Select 'Language' with the + and - buttons.
3
4
Select the desired language with the + and -
5
buttons.
6
7.11 Setting temperature scale
D
Note:
You can only set the temperature scale in the
menu of the parent unit.
You can set the temperature scale either to
Celsius (C) or Fahrenheit (F).
Select 'Settings' with the + and - buttons.
1
2
Select 'Temp scale' with the + and - buttons.
3
4
Select 'Celsius' or 'Fahrenheit' with the + and -
5
buttons.
7.12 Reset function
This function in the menu of the parent unit
allows you to reset both the parent unit and the
baby unit to the default settings at the same time.
You can use this function if problems occur that
you cannot solve by following the suggestions
in chapter 'Frequently asked questions'.
Select 'Settings' with the + and - buttons.
1
2
Select 'Reset' with the + and - buttons.
3
4
5