Battery Charger Problems - Toro WorkmanR e2050 Service Manual

Battery Charger Problems

Problem
Battery charger does not turn on.
Battery charger does not turn off.
Battery charger fuse blows.
The AC outlet circuit breaker or fuse blows when using
the battery charger.
Electrical System (Rev. B)
Possible Causes
AC outlet fuse/circuit breaker blown.
AC outlet is faulty.
Vehicle wiring is loose or damaged (see electrical
schematic in Chapter 6 – Electrical Diagrams).
Fusible link FL1 is damaged.
Vehicle charger interlock switch or circuit wiring faulty.
Vehicle charger receptacle or circuit wiring damaged.
Battery charger is faulty.
Battery charger is faulty.
NOTE: Charging new batteries or charging batteries in
cold temperatures may require extended charge time
to achieve full charge.
Vehicle battery polarity is reversed (vehicle battery
cables incorrectly attached).
Vehicle charger receptacle polarity is reversed.
Battery charger is faulty.
Overloaded AC circuit.
Battery charger is faulty.
Page 3 – 10
Workman e2050/e2065