Marquis SPIRIT Operating And Troubleshooting Manual page 29

glossary
Chlorine Sanitizer – A fast dissolving, granular
product used for sanitizing the spa water. Dispensed
manually into the water as needed.
Crystal Clear Clarifier – Restores clarity to dull
water by combining unfilterable microscopic particles
into larger particles that can be effectively filtered.
Filter Revive – Keeps your filter operating efficiently
by removing grease, grime, and other buildup that
can impair the filtration process.
Foam Eliminator – Instantly rids the spa of undes-
ired foam.
Metal and Stain Control – Rids spa of minerals and
metals that can interfere with filtration, affect sanitizer
efficiency, and stain spa surfaces. Necessary if you
have well water or water with a high metal/mineral
concentration.
Ozonator – A device that produces bacteria killing
ozone gas to assist in water sanitation. The use of an
ozonator significantly reduces the amount of chemi-
cal product needed to maintain clean, fresh water.
pH – The pH level is the measure of acidity and
alkalinity of the water. It is measured on a scale of 0 -
14. The ideal pH level is 7.2 - 7.6. When the pH level
falls below 7.2, damage to metal in the equipment
can occur. A pH level above 7.8 can reduce the
effectiveness of the sanitizer, and cause cloudiness
and scale formation. Improper pH levels can be
irritating to the eyes.
pH and Alkalinity Decrease – Decreases the pH
and alkalinity level of the water in your spa.
pH and Alkalinity Increase – Increases the pH and
alkalinity level of the water in your spa.
PAGE 66
MARQUIS SPAS