1
Tools and Supplies
You will need these tools and supplies to
install your VM9224BT:
Torx type, flat-head and Philips
screwdrivers
Wire cutters and strippers
Tools to remove existing radi'o (screw
driver, socket wrench set or other tools)
Electrical tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16 - 18 gauge speaker wire
VM9224BT
What's in the Box
VM9224BT Head Unit
Left and Right Double DIN
Mounting Brackets
Double DIN Half Sleeve Install Bracket
External Microphone
Two Custom Cosmetic Trim Rings
Parking Brake Wire
Hardware Bag
Speaker Output Harness
Power Input Harness
2 x Accessory Harness
Installation Guide
WARNING! Never install this unit where operation and viewing could interfere with
safe driving conditions.