Chapter 4:Spx Smartpilot Specifications - Raymarine SPX 10 Installation Manual

Chapter 4: SPX SmartPilot specifications
SPX SmartPilot computer specifications
Nominal supply voltage
X 10
X 30
X SOLENOID
Operating voltage range
X 10, X 30, X SOLENOID
Power consumption (standby)
X 10, X 30, X SOLENOID
Gyro
Environmental conditions
operating temperature
non-operating temperature
relative humidity limit
water protection
Storage conditions when
packed
temperature range
relative humidity limit
Dimensions
X 10, X 30, X SOLENOID
Weight
X 10
X 30, X SOLENOID
Inputs
X 10, X30, X SOLENOID
Outputs
X 10, X 30
X SOLENOID
Raymarine drive compatibility
X 10
X 30
X SOLENOID
Drive motor output
X 10
X 30
Drive clutch output
X 10
X 30
X SOLENOID
SeaTalk output
X 10
X 30, X SOLENOID
12 or 24 V DC (fuse protected at 15A)
12 or 24 V DC (fuse protected at 40A)
12 or 24 V DC (fuse protected at 15A)
10 V to 32 V DC
300 mA
internal GyroPlus fitted onto circuit board as standard
-10°C to 55°C (14°F to 131°F)
-20°C to 70°C (-4°F to 158°F)
80%
drip resistant when mounted vertically
-5°C to 50°C (23°F to 122°F)
75%
(width, height, depth)
307mm (12.1 in), 195 mm (7.7 in), 70 mm (2.8 in)
1.1 kg (2.42 lbs)
2.2 kg (4.85 lbs)
fluxgate compass, rudder position sensor, NMEA 0183 v2.3,
ng
SeaTalk, SeaTalk , power, sleep switch
NMEA 0183 v2.3, SeaTalk, SeaTalk
NMEA 0183 v2.3, SeaTalk, SeaTalk
all Type 1 drives/pumps (excluding CR pumps) (drive voltage must
match boat's supply voltage)
all Type 1, Type 2 and Type 3 drives / pumps (drive voltage must
match boat's supply voltage)
CR pumps etc.
continuous 10A at supply voltage
continuous 30A at supply voltage
1.2A at 12 / 24 V selectable
3.0A at 12 / 24 V selectable
2.0A at 12 / 24 V selectable
2A at 12 V (fuse protected at 2A)
3A at 12 V (fuse protected at 3A)
ng
, drive motor, drive clutch
ng
, bypass valve, solenoid drive
43