Specifications - Raymarine 150 Installation Manual

Specifications

Specifications
Course computer specifications
Nominal supply voltage:
Type 150/150G
Type 400/400G
Operating voltage range:
Type 150/150G
Type 400/400G
Power consumption (standby)
GyroPlus yaw sensor:
Operating conditions:
temperature range
relative humidity limit
water protection
Storage conditions:
temperature range
relative humidity limit
Dimensions:
width
height
depth
Weight
Inputs
Outputs
Raymarine drive compatibility:
Type 150/150G
Type 400/400G
Drive motor output:
Type 150/150G
Type 400/400G
[specifications continue on next page]
12 V DC (fuse protected at 30 A)
12 V or 24 V DC (fuse protected at 40 A)
10 V to 16 V DC
10 V to 32 V DC
300 mA
• Type 150G/Type 400G: internal GyroPlus fitted onto circuit board
• Type 150/Type 400: option of external GyroPlus or dealer-fit
internal GyroPlus
-10°C to 55°C (14°F to 131°F)
80%
drip resistant when mounted vertically
-5°C to 50°C (23°F to 122°F)
75%
307 mm (12.1 in)
195 mm (7.7 in)
70 mm (2.8 in)
2.1 kg (4 lb 7.5 oz)
fluxgate compass, external GyroPlus yaw sensor, rudder position
sensor, NMEA 0183 v2.3 (x2), SeaTalk (x2), off switch, power,
drive solenoid return
NMEA 0183 v2.3 (x2), SeaTalk (x2), drive motor, drive clutch
all Type 1 12 V and Type CR1 12V drives/pumps
all Type 1, Type 2 and Type 3 drives/pumps (drive voltage must match
boat's supply voltage)
continuous 18 A at 12 V
continuous 30 A at supply voltage
45