Neutral Adjustment - Hydrostatic Models - Toro LX Lawn Tractor Service Manual

CHASSIS
Neutral Adjustment - Hydrostatic
Models
Before making a neutral adjustment, the transmission
must be warmed up for at least 10 minutes.
1. Loosen the bolt and washer retaining the right side
wheel to the right side axle (Fig. 323).
3
2. Raise and support the right rear end of the tractor to
permit removing the right rear tire. Make sure the left
rear tire stays on the ground.
3-84
Fig 323 PICT-7221
3. Remove the bolt, washer and wheel assembly from
the right axle (Fig. 324).
Fig 324
4. Locate the neutral adjusting puck and loosen the
Allen head bolt. If it's diffi cult to loosen, heat the
aluminum housing near the bolt with a propane torch
(Fig. 325).
Fig 325
A. Adjusting puck
LX Lawn Tractor Service Manual
PICT-7597
A A
PICT-7599