Brake Adjustment - Hydrostatic Models - Toro LX Lawn Tractor Service Manual

Lx series
Table of Contents

Advertisement

16. Install the other end of the Autodrive pedal return
spring to the tab on the frame (Fig. 347).
Fig 347
17. Check the travel distance on the idler bracket (ap-
proximately 1-3/8" (3.5cm) of travel with 10 lbs.
(4.5kg) of pressure applied to the Autodrive pedal). If
additional adjust-ment is needed, go back to step 3
and repeat adjustment.
18. Install the mower deck. Refer to "46" Mower Deck
Installation" on page 7-72.
LX Lawn Tractor Service Manual
Brake Adjustment - Hydrostatic
Models
1. Loosen the bolt retaining the right rear wheel to the
axle (Fig. 348).
PICT-7704
2. Raise and support the right rear end of the tractor.
Make sure the left rear tire stays on the ground.
3. Remove the bolt, washer and wheel assembly from
the right axle (Fig. 349).
CHASSIS
Fig 348
PICT-9609
Fig 349
PICT-7597
3
3-91

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx420Lx425Lx460Lx465Lx500

Table of Contents