CHASSIS
Installation
1. Install the hex fl ange bushing into the steering
support bracket ensuring the hex is seated in the
bracket (Fig. 093).
3
2. Slide the steering shaft up into the tower from below,
insert the lower end of the steering shaft into the hex
fl ange bushing (Fig. 094).
3-24
Fig 093
PICT-7668a
Fig 094
PICT-7663
3. Raise the tractor.
4. Push up on the steering shaft to install a washer
onto the steering shaft (Fig. 095).
Fig 095
5. Slide the pinion onto the steering shaft (Fig. 096).
Fig 096
LX Lawn Tractor Service Manual
PICT-7661a
PICT-7659a