Maintenance
6. Remove the speaker from the control head housing.
2.6.5 CDM1250, CDM1550, CDM1550
Disassembly
1. Dismount the control head housing from the back housing as described for control head
CDM750, Figure 2-6.
2. Disconnect the speaker socket and remove the speaker (Figure 2-9) with tube by stretching the
control head housing and pulling out the tube.
3. Remove the board from the control head housing by stretching the control head housing and pull-
ing up on the board as described for control head CDM750, Figure 2-8.
4. Remove the keypad from the control head housing by lifting up the rubber keypad.
Figure 2-8: Board, Keypad and Speaker Removal
•
LS, and CDM1550
Figure 2-9: Speaker and Speaker Tube Removal
+
•
LS
Control Head
2-9