Taillamps, Turn Signal, Stoplamps And Sidemarker Lamps - Buick Enclave 2008 Owner's Manual

Taillamps, Turn Signal, Stoplamps
and Sidemarker Lamps
A. Taillamp
B. Sidemarker Lamp
5-48
To replace one of these bulbs, do the following:
1. Open the liftgate. See Liftgate on page 2-12 or
Power Liftgate on page 2-14 for more information.
2. Remove the convenience net, if the vehicle
has one.
3. Remove the three hex nuts holding the taillamp
assembly in place.
4. Pull out the taillamp assembly.
5. Turn the bulb socket counterclockwise and pull it
straight out to remove it.
6. Replace the old bulb with a new one.
7. Turn the bulb socket clockwise to reinstall.
8. Reverse these steps to reinstall the taillamp
assembly.
When reinstalling the taillamp assembly, make sure
the plastic pin on the taillamp assembly lines up
and is inserted correctly into the opening of
the vehicle.